Ballast - Tungsten - Bar $7.78
Available in three versions: Bar Shaped. 2.5 grams. Lead free. 10 grams. Putty. Put it anywhere you want. Lead free. Cylinder 6.2x1mm, 3.5g (6x0...
Ballast - Tungsten - Putty $12.98
Ballast - Tungsten - Round (6x) $7.78
Braid - Copper $7.78
1m (3 ft). Copper Car Braid. You can cut it to the length you need.
Braid - Tinned Copper $7.78
1m (3 ft). Tinned Copper Car Braid. You can cut it to the length you need.
Clamshell Case for Car - Transparent $5.18
- Designed to safely and conveniently transport most 1:32 slot car models.- Includes clamshell blister, thermoformed base support and two protective sponge pads...
Digital Chip SSD $45.48
For Scalextric Sport Digital systems. Can be installed in most Slot.It cars (and other brands too). Smaller than the SISP12 part, which it replaces...
Eyelets $5.18
5mm (pack of 10)
Eyelets - Brass $5.18
Pack of 10
Hex Driver - M2 0.95mm Dynamometric Key - Adjustable Torque $24.70
Slot.it Hexagonal M2 0.95mm dynamometric key with adjustable torque. New hexagonal tip, adjustable torque screwdriver for Slot.it M2 grub screws. New tip material made of special 'tool grade' steel...
Hex Driver M2 .95mm - Adjustable Torque $19.48
Slot.it Hex Driver M2 0.95mm dynamometric key with adjustable torque. Easily adjusting spring resistance for optimal use. The new material makes it very resistant to wear. Use for removing or fastening set screws...
Lighting IR LED Kit - w/Wires $6.48
Lighting Kit - Analog & SSD $24.68
Lighting Kit - Base Module $24.68
Lighting Kit - Front/Rear Lights $16.88
Lighting Kit - w/Brakes $32.48
Magnet - Neodimium - Racing $7.78
Magnet - Neodimium - Standard $6.48
Magnet - Neodimium C - for Scalextric $6.48
Magnet - Neodimium Super - for Scalextric $5.18
SCX Digital Adapter for HRS2 Chassis $64.98
Slot.it SCX Digital Adapter for HRS2 Chassis Pack includes: - SCX electronics- plastic parts to install the electronics on HRS2 chassis.- All parts for a complete assembly of pick-up for digital SCX track.- supports to...
Tools - Extraction Plate & Counter Bushing $12.98
Replacement Part for SISP21. The steel extraction plate fits in the main body of SISP21 to extract the pinions. It is designed to allow extraction even if the pinions are located very close to the motor case without causing...
Tools - Pro Extractor Press $77.98
Slot.It's high-quality professional extractor/press makes it easy to install or remove pinions onto/from any 1/32 electrical motor. The anodized aluminum frame is very strong yet surprisingly light. Designed for use with...
Tools - Pro Extractor Upgrade $50.68
Upgrade Part for SISP21 (SISP20/SISP21 not included) Slot.it Brand Upgrade for SISP20 / SISP21 Professional Pinion Gear Puller / Press Can reposition pinion in chassis on both AW and SW ApplicationsChanging pinion: the...
Tools - Professional Mini Pinion Puller $51.98
The new Mini Puller allows you to remove and adjust the pinion position without waste of time and hard work to unmount transmission and remove motor from chassis.
Controller - Replacement Fuses - 3.15A - Fast (5x) $5.18
Replacement fuses for SCP-13.15A - fast (5x)
Controller Cartridge - Analog - High Current $130.00
Slot.it Positive Polarity Analog High Current Controller Cartridge - 40 Amps Surge, 20 Amps Continuous rated - Comes with bare wire ends and a set of banana plugs - Operates better than the SISCP01g at high current levels -...
SCP-2 Universal Digital Controller $265.87
Slot.it SCP-2 controller with universal digital cartridge. This controller is compatible with digital systems made by Carrera, Scalextric, Ninco and SCX...
SCP-2 Analog Controller - Universal - Dual Polarity $227.50
- SCP-2 analog controller – universal - dual polarity - Not compatible with unregulated power supplies. - We suggest using a regulated power supply with at least 2A per lane. - Home racing: not...